[MOTO] Ducati 999 "MONOBRAZO"

[ALEX GAROLI]

Hi there, this is my new proyect, a New-Ray 1/12 Ducati 999:


I found this picture in internet and I inmediatelly wanted to tune my bike.

But later I tought I can do better, changin the regular swing arm to a single sided one, and more agressive paint:

Im going to use a part of the fairing from a Ducati Supersport 1000, because the 999 fairing is too flat:

I allready made the sketches of the single sided arm and the necesary modifications, because the rear brake and traction, I havent decide if use a tubular swing arm or monocoque tipe, I have to bend the rim spokes to fit the new swing arm:


This is the frame anf fork:

These are the parts to modify:

I saw a sketch from when ducati was planning to release the sport classic concepts, like paul smart replica:

And Im thinking in paint the bike like that, I dont know yet.
Here is my sketch:

I allready made the main arm:

It came from a broken sunglasses, I liked the oval shape:

Next step is to cut the swing arm:

[ALEX GAROLI]

The technique for bending the rim consit in use a lighter, make circular movement under the rim, and then press it against an objet that has the distance I need to bend:

There it is, a rim for single sided arm:

And a quick check out:
Next step is to complete the swinr arm structure, it is similar to the ducati mh900e and monster st4:

Here in mexico is hard to fin materials, so I have to use anything, to get a thin tubing, I got it from a candy:

Here is the rear view:

I added primer to find imperfections, I havent decided if paint it yellow or the paul smart version:

Next, I cutted of the bottom of the fairing, now I have to make the parts fit:

To paste really hard two pieces, I use krazy and sodium bicarbonate, it makes a really strong union ans is sandable:

Here is the two parts glued and with primer, the union was perfect:

And here is with the ducati yellow:

Icutted off 3mm to the forks to maka the front end lower:

Here are the basic paint pattern:

The bike getting togheter again:


I added a anti heat cover made with thin aluminum sheet:

[ALEX GAROLI]

Here are the parts with grille inserts:





Really close to the sketch:

More pictures:


Desmosedici type exhaust pipes:

Radiator grille:

The monoarm:

With her original sister:




And more pictures:


Another unique model for my shelves!

[decals]

wow you are the Mexican version of our "Ditraverso", also him likes to modify and invent new bikes versions

Take a look on its gallery ditraverso's Gallery

Ciao ciao

[gionc]

Welcome aboard Alex.
Feel free (read.... you must.. ) to post smaller images, it's quite tricky browse the wip so....

[bootsy]

I agree with Gionc. It takes a lot for those who hasn't a fast connection to open your wips.

PS: your choice of sunglasses and other simple objects to improve your models in great!