The technique for bending the rim consit in use a lighter, make circular movement under the rim, and then press it against an objet that has the distance I need to bend:
There it is, a rim for single sided arm:
And a quick check out:
Next step is to complete the swinr arm structure, it is similar to the ducati mh900e and monster st4:
Here in mexico is hard to fin materials, so I have to use anything, to get a thin tubing, I got it from a candy:
Here is the rear view:
I added primer to find imperfections, I havent decided if paint it yellow or the paul smart version:
Next, I cutted of the bottom of the fairing, now I have to make the parts fit:
To paste really hard two pieces, I use krazy and sodium bicarbonate, it makes a really strong union ans is sandable:
Here is the two parts glued and with primer, the union was perfect:
And here is with the ducati yellow:
Icutted off 3mm to the forks to maka the front end lower:
Here are the basic paint pattern:
The bike getting togheter again:
I added a anti heat cover made with thin aluminum sheet:
