Here is some work, I added some putty to the numberplate extension and aplly primer:
Here is the pattern to cut the holes for the headlights:
I used dremel to shape the light holes:
I did a preview build to see how thing are, the numberplate extension looks good:
As you can see I already got the street tires, I got these from a ducati I built some months ago, and I wanted slicks for that bike, so the change really worked for me:
Now I have to see how to attach the stop light, in the 2007 cbr the light was white, with leds, but as the rc212v is suposed to be unvelied in 2007 as a race bike, the street bike would be 2008, and in this year the cbr 1000rr uses a red lght again, so Ill use a red light simulating leds, the stop in the cbr is hided below the tail sharp shape:
I was missing some points, this is supposed to be a street bike, so Its going to need a silencer, so I added a little one, just to "reduce" some noise and fire:
And I need a bike stand, a bike leg, there is not much space because the big fairing, so I drilled a hole in the fairing itself and ill make a support in the inside to the frame:
Now I have to make the shape of the lights with a 998 units and housing:
