Fate voi ... questa la risposta ricevuta :
Quote:
If you have performed all the calibration procedures of the radio remote control stick and calibration procedure of the drone gyroscope, your model may be afflicted by a prom programming problem.
In this case, try updating the model with the latest firmware available at hubsan.com and let me know if you can fix it.
Remember to perform all calibration procedures and, if necessary, force it manually.
Inspect the radio remote control stick and remove the plastic caps as they cause calibration problems.
If you still encounter problems, let me know why I need the serial number for a possible internal card submission to be supported.
If you do not solve it, I also send you the procedure to replace the card inside the drone.
You must also send me a photo of the code under the drone but I hope you solve it by updating the firmware because the latest versions have been updated to be free of these problems.
I also need the serial code of your radio transmitter.
|
Questo fine settimana, appena ho un pò di tempo libero, aggiorno il firmware come mi è stato consigliato e se non risolvo li ricontatto
Ma speriamo di risolvere.