Forum Modellismo.net

Forum Modellismo.net (http://www.modellismo.net/forum/)
-   Automodelli elettrici (http://www.modellismo.net/forum/automodelli-elettrici/)
-   -   Carson brushless (http://www.modellismo.net/forum/automodelli-elettrici/67829-carson-brushless.html)

ENEA 17-03-09 08:34 PM

Carson brushless
 
Anche la Carson ha messo fuori i suoi modell brushless:

http://www.carson-modelsport.com/Com...doddetline.gif http://www.carson-modelsport.com/Com...04016_00-1.jpg


An extraordinary combination – a CARSON RTR model with Brushless Power!

Porsche GT3 RS Brushless – our new “Brushless Racer” based on our new and favourable CE-10 chassis – completely assembled. This chassis offers many possibilities for different adjustments, to achieve better traction. Combined with the brushless "Dragster" speed controller, the permanent 4WD passes the power of the Shooter 12T electric motor (without sensors) to all 4 wheels. Innovative axle geometry: The parts on the front and rear shafts are identical. This means that the suspension parts and the steering knuckles fit on the left and right side as well as on the front and rear! Front and rear differential case/ gearbox are also identical.
Included:
RTR assembled car • 3-channel wheel-type radio control 40MHz FM (transmitter, receiver, 1 already mounted steering servo CS-5, cable for on-off-switch, crystals) • brushless set "DRAGSTER" / 12T E-motor • printed body with decal sheet.

Technical Details:
4WD with universal drive shafts ∙ 1/10 scale ∙ fully ball-raced ∙ oil shock absorbers with tuned springs ∙ slipper clutch ∙ track and camber adjustable ∙ Big Wheel tyres completely glued with inserts ∙ CARSON brushless drive with 12T motor and BL controller unit ∙ extremely low centre of gravity ∙ pivot ball wheel suspension front and rear ∙ bevel gears front and rear ∙ bevel differential front/ rear ∙ pre-assembled, ready to run ∙ 3-channel stick-type radio control 40 MHz FM (transmitter, receiver, brushless set, fitted servo CS-3 for the steering, on-off switch cable, crystals) ∙ printed body with decal sheet.
Recommended accessories:
609000 2 x battery set AA size 2300 mAh
608022 racing pack 7.2 V/3000 mAh or
608090 LiPo battery 7.4V/4600 mAh



http://www.carson-modelsport.com/Com...04016_01-0.jpg http://www.carson-modelsport.com/Com...04016_04-0.jpg
http://www.carson-modelsport.com/Com...04016_02-0.jpghttp://www.carson-modelsport.com/Com...04016_05-0.jpg

ENEA 17-03-09 08:38 PM

Stormracer extreme brushless
 
http://www.carson-modelsport.com/Com...doddetline.gif http://www.carson-modelsport.com/Com...04015_00-1.jpg


An extraordinary combination – a CARSON RTR model with Brushless Power!

Stormracer Extreme Brushless – our new “Brushless Buggy” based on our new and favourable CE-10 chassis – completely assembled. This chassis offers many possibilities for different adjustments, to achieve better traction. Combined with the brushless "Dragster" speed controller, the permanent 4WD passes the power of the Shooter 12T electric motor (without sensors) to all 4 wheels. Innovative axle geometry: The parts on the front and rear shafts are identical. This means that the suspension parts and the steering knuckles fit on the left and right side as well as on the front and rear! Front and rear differential case/ gearbox are also identical.
Included:
RTR assembled car • 3-channel wheel-type radio control 40MHz FM (transmitter, receiver, 1 already mounted steering servo CS-5, cable for on-off-switch, crystals) • brushless set "DRAGSTER" / 12T E-motor • printed body with decal sheet.

Technical Details:
4WD with universal drive shafts ∙ 1/10 scale ∙ fully ball-raced ∙ oil shock absorbers with tuned springs ∙ slipper clutch ∙ track and camber adjustable ∙ Big Wheel tyres completely glued with inserts ∙ CARSON brushless drive with 12T motor and BL controller unit ∙ extremely low centre of gravity ∙ pivot ball wheel suspension front and rear ∙ bevel gears font and rear ∙ bevel differential front and rear ∙ pre-assembled, ready to run ∙ 3-channel stick-type radio control 40 MHz FM (transmitter, receiver, brushless set, fitted servo CS-3 for the steering, on-off switch cable, crystals) ∙ printed body with decal sheet.
Recommended accessories:
609000 2 x battery set AA size 2300 mAh
608022 racing pack 7.2 V/3000 mAh or
608090 LiPo battery 7.4V/4600 mAh
http://www.carson-modelsport.com/Com...04015_01-0.jpg http://www.carson-modelsport.com/Com...04015_04-0.jpg http://www.carson-modelsport.com/Com.../separator.gif

ENEA 17-03-09 08:56 PM

Carson specter 1/8 brushless.
 
Specter 2 Brushless RTR Item Number: 409000 http://www.carson-modelsport.com/Com...doddetline.gif http://www.carson-modelsport.com/Com...09000_00-1.jpg


An extraordinary combination – a CARSON RTR model with Brushless Power!

Specter Two Brushless – our new “Brushless Buggy” 1/8 based on our favourable CY chassis – completely assembled. This chassis offers many possibilities for different adjustments, to achieve better traction. Combined with the brushless "Dragster" speed controller, the permanent 4WD passes the power of the Shooter 12T electric motor (without sensors) to all 4 wheels. Innovative axle geometry: The parts on the front and rear shafts are identical. This means that the suspension parts and the steering knuckles fit on the left and right side as well as on the front and rear! Front and rear differential case/ gearbox are also identical.
Included:
RTR assembled car scale 1/8 • 3-channel wheel-type radio control 40MHz FM (transmitter, receiver, 1 already mounted steering servo CS-9, cable for on-off-switch, crystals) • brushless set "DRAGSTER" / 12T E-motor • printed body with decal sheet.


Technical Details:
  • 4WD
  • main gear made from hardened steel at the centre differential
  • 3 steel high performance differentials
  • 1/8 scale
  • fully ball-raced
  • oil shock absorbers with tuned springs
  • slipper clutch
  • BL motor SHOOTER 12T without sensors + BL controller unit DRAGSTER SPORT
  • hardened drive shafts
  • CNC milled gears
  • 3 mm aluminium chassis with countersunk screws
  • chassis brace front and rear
  • adjustable oil shock absorbers
  • adjustable rear wing
  • 17 mm standard rim driver
  • Racing High Grip tyres completely glued with inserts onto reinforced spoke wheels
  • hub carrier and alu-uprights for smooth steering
  • steering servo in horizontal position + steel gear 9 Nm ∙ pre-assembled RTR
  • 3-channel stick-type radio control 40 MHz FM (transmitter, receiver, brushless set,
    mounted servo CS-9 for the steering, on-off switch cable, crystals)
  • printed body with decal sheet.
Recommended drive battery:
608091 LiPo battery 11.1V/ 3200 mAh
http://www.carson-modelsport.com/Com...09000_01-0.jpg http://www.carson-modelsport.com/Com...09000_02-0.jpghttp://www.carson-modelsport.com/Com...09000_03-0.jpg http://www.carson-modelsport.com/Com.../separator.gif


Tutti gli orari sono GMT +2. Attualmente sono le 10:23 PM.