Vai indietro   Forum Modellismo.net > Categoria Automodelli Elettrici > Automodelli elettrici
Rispondi
 
Strumenti della discussione
Vecchio 07-03-09, 07:36 AM   #1
ENEA
Guest
 
Messaggi: n/a
predefinito Associated nuovi arrivi.

Associated SC8e 1:8 Scale Electric Race Kit

“The ultra-realistic SC8 was designed to look like full-size 4WD race trucks that compete on short course off-road tracks around the country. Team Associated’s all-new SC8e kit brings all of that scale excitement to those who prefer the awesome performance, convenience, and cleanliness of electric power. Like the SC8, the SC8e was designed to meet the scale specifications and handling of full-size short course race trucks. It’s all there! A durable and realistic clear race truck body, KMC™ wheels with realistic off-road tires, scale suspension travel, full roll-cage, and functional mud flaps result in an unparalleled scale experience. Good looks mean nothing without the engineering to back it up. Team Associated’s engineering team has developed a practical chassis design that incorporates the same exceptional strength, durability, cornering capability, jumping ability, and rough track handling that characterize the nitro SC8. With special features such as a hard anodized machined chassis, correctly balanced and optimized weight distribution, composite Big Bore shocks featuring 4mm gold shafts, and upgraded steering system, the SC8e is right at home on the race track - just like its full-size counterparts. Scale realism and electric power make the SC8 the must-have truck in 2009!
SC8e Kit Features:
• Authentic, scale 1.5mm thick short course truck unpainted body
• Functional full roll cage with integral dirt shields
• Functional and realistic front and rear bumpers with mud flaps
• Scale wheels and tires with foam inserts and bead guards
• Molded battery tray supports two ROAR-approved 1:10 scale size 7.4v LiPo battery packs with room for foam pads
• Receiver box, servo, and battery tray remove from car in one piece for easy maintenance and cleaning
• Convenient wire routing keeps critical electronic wires out of drive-train components and simplifies disassembly
• Includes pinion gear (15T) and molded composite spur gear (46T)
Rigid one-piece motor mount utilizes standard motor screw mounting pattern
• Large elevated speed control mounting area allows for easy screw mounting of common speed controllers
• Upgraded dual bell-crank steering for more consistent steering and reduced bump-steer
• 16mm Big-Bore molded composite shocks with pre-load clips
• Hard anodized 7075-T6 aluminum chassis
• 3mm aluminum shock towers
• Durable 10mm thick suspension arms
• Rear molded CVA boots to keep dirt and mud out of rear joints
• Alloy steel turnbuckles
• Caster blocks adjust 14, 16, or 18 degrees with molded inserts
• Adjustable suspension pivot bushings for different pivot height options
• 4.30:1 ratio gearboxes
• 3.5mm light CVA drivetrain
• Utilizes 3 hook-and-loop straps to secure LiPo batteries into battery tray
• Enclosed receiver box to protects electronic components.”
  Rispondi quotando
Vecchio 07-03-09, 07:40 AM   #2
ENEA
Guest
 
Messaggi: n/a
predefinito Il buggy

Associated RC8e 1/8th 4WD Electric Buggy

“Team Associated is proud to release the RC8e, a 1:8 scale electric powered competition buggy kit based on the championship winning RC8 platform! The RC8e engineering team has developed a practical design that incorporates the same exceptional strength, durability, cornering capability, jumping ability, and rough track handling that characterize the nitro powered RC8. With special features such as a hard anodized machined chassis, correctly balanced and optimized weight distribution, composite “Big Bore” shocks featuring 4mm gold shafts, upgraded steering system, and exclusive body design, every inch of the RC8e screams high-performance and durability. In fact, the RC8e has already proven itself as a top competitor with a 1st Place finish in its debut event! Enjoying the awesome performance, convenience, and cleanliness of electric power has never been easier!
RC8e Kit Features:
• Molded battery tray supports two ROAR-approved 1:10 scale size 7.4v LiPo battery packs with room for foam pads
• Receiver box, servo, and battery tray are removable in one piece for easy maintenance and cleaning
• Convenient wire routing keeps critical electronic wires out of drive-train components and simplifies disassembly
• Includes pinion gear (15T) and molded composite spur gear (46T)
• Rigid one-piece motor mount utilizes standard motor screw mounting pattern
• Large elevated speed control mounting area allows for easy screw mounting of common speed controllers
• Upgraded dual bellcrank steering for more consistent steering and reduced bump-steer
• 16mm “Big-Bore” molded composite shocks with preload clips
• Hard anodized 7075-T6 aluminum chassis
• 3mm aluminum shock towers
• Durable 10mm thick suspension arms
• Rear molded CVA boots to keep dirt and mud out of rear joints
• Caster blocks adjust 14, 16, or 18 degrees with molded inserts
• Adjustable suspension pivot bushings for different pivot height options
• 4.30:1 ratio gearboxes
• 3.5mm light CVA drivetrain
• Pre-drilled wing with adjustable angle and location
• Blue aluminum drive hexes
• Blue aluminum nylock wheel nuts
• 83mm Factory Team wheels (#89296)
• Speed control mounting area includes convenient switch-mounting boss
• Utilizes 3 hook-and-loop straps to secure LiPo batteries into battery tray
• Enclosed receiver box to protects electronic components
• Unpainted RC8e body with cooling scoops (#89523)”
  Rispondi quotando
Rispondi

Strumenti della discussione

Regole d'invio
Non puoi inserire discussioni
Non puoi inserire repliche
Non puoi inserire allegati
Non puoi modificare i tuoi messaggi

BB code è attivo
Le smilie sono attive
Il codice IMG è attivo
il codice HTML è disattivato
Trackbacks are attivo
Pingbacks are attivo
Refbacks are disattivato


Discussioni simili
Discussione Ha iniziato questa discussione Forum Risposte Ultimo messaggio
acquistelli nuovi nuovi... lapo Statico - Kits, Info e Varie 75 19-09-07 02:09 PM
ultimi arrivi degni di nota.... michele83 Statico - Kits, Info e Varie 11 17-11-05 04:04 PM
Nuovi consigli!!! xxxxxxxxxxxxxxxx Mini4wd Principianti 1 07-07-05 05:21 PM
Nuovi e vekki arrivi lk Slot car 7 29-03-03 09:07 AM


Tutti gli orari sono GMT +2. Attualmente sono le 06:52 PM.


Chi Siamo | Pubblicità | Scambio banner | Disclaimer | Regolamento | P.IVA 00319251203
Disponibile su App Store Disponibile su Google Play